Siemens SINAMICS G120XA - Manual Backup; Procedure with BOP-2; Transferring the Setting from the Memory Card; Automatic Transfer

8.1.2.2 Manual backup
Precondition
● The converter power supply has been switched on.
● No memory card is inserted in the converter.
Function description
Procedure with BOP-2
(;75$6
72&$5'
In the "OPTIONS" menu, select "TO CARD".
3$5$06(7

Set the number of your data backup. You can back up 99 different settings on
the memory card.
(6&2.
6$9,1*
3$U$6
;;;<<<
&/21,1*
Start data transfer with OK.
72&$5'
G2Q(
Wait until the converter has backed up the settings to the memory card.
You have backed up the settings of the converter to the memory card.
❒
8.1.3 Transferring the setting from the memory card
8.1.3.1 Automatic transfer
Precondition
The converter power supply has been switched off.
Saving the settings and series commissioning
8.1 Memory card
SINAMICS G120XA converter
728 Operating Instructions, 03/2019, FW V1.0, A5E44751205B AB