Maximum permissible motor cable length (Page 64)
NOTICE
Damage to the output reactor by exceeding the maximum pulse frequency
The maximum permissible pulse frequency when using the output reactor is 4 kHz. The output
reactor can be damaged if the pulse frequency is exceeded.
● When using an output reactor, the pulse frequency of the converter must not be higher than
4 kHz.
NOTICE
Damage to the output reactor if it is not activated during commissioning
The output reactor may be damaged if it is not activated during commissioning.
● Activate the output reactor during commissioning via the parameter specified by the
converter manufacturer.
● Activate the output reactor during commissioning according to the electric specifications.
Note
Output reactors are available as optional components for converters of frame sizes FSD ... FSG
and FSH/FSJ only.
Article number
Converter frame size Rated power (kW) Output reactor
FSD 18.5 6SL3202-0AE23-8CA0
22 ... 37 6SE6400-3TC07-5ED0
45 6SE6400-3TC14-5FD0
FSE 55
FSF 75 ... 90
110 6SL3000-2BE32-1AA0
132 6SL3000-2BE32-6AA0
FSG 160 6SL3000-2BE33-2AA0
200 6SL3000-2BE33-8AA0
250 6SL3000-2BE35-0AA0
FSH 315 6SL3000-2AE36-1AA0
355 ... 400 6SL3000-2AE38-4AA0
FSJ 450 ... 500 6SL3000-2AE41-0AA0
560 6SL3000-2AE41-4AA0
Description
2.6 Optional components
SINAMICS G120XA converter
Operating Instructions, 03/2019, FW V1.0, A5E44751205B AB 33
To Next Page
Loading...
