Siemens SINAMICS G120XA - Page 899

CO: I_max controller frequency output
r1343, 516
CO: Lower effective torque limit
r1539, 527
CO: Main setpoint effective
r1073, 474
CO: Maximum power unit output current
r0289, 385
CO: Moment of inertia total, scaled
r1493, 522
CO: Mot. potentiometer speed setp. in front of ramp-
fct. gen.
r1045, 471
CO: Motor temperature
r0035, 357
CO: Motor utilization thermal
r0034, 357
CO: Motorized potentiometer setpoint after ramp-
function generator
r1050, 471
CO: Output current maximum
r0067, 371
CO: Output frequency
r0066, 371
CO: Output voltage
r0072, 372
CO: Output voltage smoothed
r0025, 355
CO: Power unit overload I2t
r0036, 358
CO: Power unit temperatures
r0037[0...19], 358
CO: Process energy display
r0042[0...2], 360
CO: PROFIdrive PZD receive double word
r2060[0...10], 565
CO: PROFIdrive PZD receive word
r2050[0...11], 562
CO: Pulse frequency
r1801[0...1], 537
CO: Ramp-down scaling output
r29577, 713
CO: Ramp-function generator acceleration
r1149, 488
CO: Ramp-function generator setpoint at the input
r1119, 481
CO: Ramp-up scaling output
r29576, 713
CO: Send binector-connector converter status word
r2089[0...4], 571
CO: Setpoint after the direction limiting
r1114, 481
CO: Speed controller I torque output
r1482, 522
CO: Speed controller setpoint sum
r1170, 488
CO: Speed controller speed setpoint
r1438, 520
CO: Speed controller system deviation
r0064, 370
CO: Speed limit in negative direction of rotation
p1086[0...n], 477
CO: Speed limit in positive direction of rotation
p1083[0...n], 477
CO: Speed limit negative effective
r1087, 478
CO: Speed limit positive effective
r1084, 477
CO: Speed setpoint after the filter
r0062, 370
CO: Speed setpoint before the setpoint filter
r0060, 369
CO: Speed setpoint from the IOP in the manual mode
r8541, 680
CO: Supplementary setpoint effective
r1077, 474
CO: Technology controller actual value after filter
r2266, 614
CO: Technology controller actual value scaled
r2272, 615
CO: Technology controller fixed value 1
p2201[0...n], 602
CO: Technology controller fixed value 10
p2210[0...n], 604
CO: Technology controller fixed value 11
p2211[0...n], 605
CO: Technology controller fixed value 12
p2212[0...n], 605
CO: Technology controller fixed value 13
p2213[0...n], 605
CO: Technology controller fixed value 14
p2214[0...n], 605
CO: Technology controller fixed value 15
p2215[0...n], 606
CO: Technology controller fixed value 2
p2202[0...n], 602
CO: Technology controller fixed value 3
p2203[0...n], 603
CO: Technology controller fixed value 4
p2204[0...n], 603
CO: Technology controller fixed value 5
p2205[0...n], 603
CO: Technology controller fixed value 6
p2206[0...n], 603
Index
SINAMICS G120XA converter
Operating Instructions, 03/2019, FW V1.0, A5E44751205B AB 897