Analog-to-digital converter (ADC) RM0453
532/1450 RM0453 Rev 5
18 Analog-to-digital converter (ADC)
18.1 Introduction
The 12-bit ADC is a successive approximation analog-to-digital converter. It has up to 18
multiplexed channels allowing it to measure signals from 12 external and 4 internal sources.
A/D conversion of the various channels can be performed in single, continuous, scan or
discontinuous mode. The result of the ADC is stored in a left-aligned or right-aligned 16-bit
data register.
The analog watchdog feature allows the application to detect if the input voltage goes
outside the user-defined higher or lower thresholds.
An efficient low-power mode is implemented to allow very low consumption at low
frequency.
A built-in hardware oversampler allows analog performances to be improved while off-
loading the related computational burden from the CPU.
To Next Page
Loading...
Need help?
General
