Section 9: Introduction to TSP operation Model 2601B-PULSE System SourceMeter Instrument Reference Manual
9-10 2601B-PULSE-901-01A April 2020
lan.status.port.dst (on page 11-125)
lan.status.port.rawsocket (on page 11-126)
lan.status.port.telnet (on page 11-126)
lan.status.port.vxi11 (on page 11-127)
lan.status.speed (on page 11-127)
lan.status.subnetmask (on page 11-128)
lan.timedwait (on page 11-128)
lan.trigger[N].assert() (on page 11-129)
lan.trigger[N].clear() (on page 11-129)
lan.trigger[N].connect() (on page 11-130)
lan.trigger[N].connected (on page 11-131)
lan.trigger[N].disconnect() (on page 11-131)
lan.trigger[N].EVENT_ID (on page 11-132)
lan.trigger[N].ipaddress (on page 11-132)
lan.trigger[N].mode (on page 11-133)
lan.trigger[N].overrun (on page 11-134)
lan.trigger[N].protocol (on page 11-135)
lan.trigger[N].pseudostate (on page 11-135)
lan.trigger[N].stimulus (on page 11-136)
lan.trigger[N].wait() (on page 11-137)
localnode.description (on page 11-139)
localnode.password (on page 11-141)
localnode.passwordmode (on page 11-141)
Miscellaneous
delay() (on page 11-42)
exit() (on page 11-82)
localnode.autolinefreq (on page 11-138)
localnode.linefreq (on page 11-140)
makegetter() (on page 11-146)
makesetter() (on page 11-147)
meminfo() (on page 11-148)
opc() (on page 11-150)
waitcomplete() (on page 11-393)
Parallel script execution
dataqueue.add() (on page 11-38)
dataqueue.CAPACITY (on page 11-39)
dataqueue.clear() (on page 11-39)
dataqueue.count (on page 11-40)
dataqueue.next() (on page 11-41)
node[N].execute() (on page 11-148)
node[N].getglobal() (on page 11-149)
node[N].setglobal() (on page 11-150)
tsplink.group (on page 11-365)
tsplink.master (on page 11-366)
tsplink.node (on page 11-366)
To Next Page
Loading...
Need help?
General
