Section 9: Introduction to TSP operation Model 2601B-PULSE System SourceMeter Instrument Reference Manual
9-18 2601B-PULSE-901-01A April 2020
trigger.timer[N].wait() (on page 11-364)
trigger.wait() (on page 11-364)
tsplink.trigger[N].assert() (on page 11-369)
tsplink.trigger[N].clear() (on page 11-370)
tsplink.trigger[N].EVENT_ID (on page 11-370)
tsplink.trigger[N].mode (on page 11-371)
tsplink.trigger[N].overrun (on page 11-372)
tsplink.trigger[N].pulsewidth (on page 11-373)
tsplink.trigger[N].release() (on page 11-374)
tsplink.trigger[N].reset() (on page 11-374)
tsplink.trigger[N].stimulus (on page 11-375)
tsplink.trigger[N].wait() (on page 11-376)
TSP-Link
These functions and attributes allow you to set up and work with a system that is connected by a
TSP-Link
®
network.
tsplink.group (on page 11-365)
tsplink.master (on page 11-366)
tsplink.node (on page 11-366)
tsplink.readbit() (on page 11-367)
tsplink.readport() (on page 11-367)
tsplink.reset() (on page 11-368)
tsplink.state (on page 11-369)
tsplink.trigger[N].assert() (on page 11-369)
tsplink.trigger[N].clear() (on page 11-370)
tsplink.trigger[N].EVENT_ID (on page 11-370)
tsplink.trigger[N].mode (on page 11-371)
tsplink.trigger[N].overrun (on page 11-372)
tsplink.trigger[N].pulsewidth (on page 11-373)
tsplink.trigger[N].release() (on page 11-374)
tsplink.trigger[N].reset() (on page 11-374)
tsplink.trigger[N].stimulus (on page 11-375)
tsplink.trigger[N].wait() (on page 11-376)
tsplink.writebit() (on page 11-377)
tsplink.writeport() (on page 11-378)
tsplink.writeprotect (on page 11-378)
TSP-Net
The TSP-Net module provides a simple socket-like programming interface to Test Script Processor
(TSP
®
) enabled instruments.
tspnet.clear() (on page 11-379)
tspnet.connect() (on page 11-380)
tspnet.disconnect() (on page 11-381)
tspnet.execute() (on page 11-382)
tspnet.idn() (on page 11-383)
To Next Page
Loading...
Need help?
General
