Tektronix Keithley 2601B-PULSE Reference Manual

Model 2601B-PULSE System SourceMeter Instrument Reference Manual Section 11: TSP command reference
2601B-PULSE-901-01A April 2020 11-113
Details
Dynamic DNS registration works with DHCP to register the host name with the DNS server. The host
name is specified in the lan.config.dns.hostname attribute.
Example
print(lan.config.dns.dynamic)
Outputs the dynamic registration state.
If dynamic DNS registration is enabled, the response is:
1.00000e+00
Also see
lan.config.dns.hostname (on page 11-113)
lan.restoredefaults() (on page 11-121)
lan.config.dns.hostname
This attribute defines the dynamic DNS host name.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Attribute (RW)
Yes
Not applicable
Nonvolatile memory
Instrument specific (see Details)
Usage
hostName = lan.config.dns.hostname
lan.config.dns.hostname = "hostName"
hostName
The host name to use for dynamic DNS registration; the host name must:
▪ be a string of 63 characters or less
▪ start with a letter
▪ end with a letter or digit
▪ contain only letters, digits, and hyphens
Details
This attribute holds the host name to request during dynamic DNS registration. Dynamic DNS
registration works with DHCP to register the host name specified in this attribute with the DNS server.
The factory default value for hostName is "k-<model number>-<serial number>", where
<model number> and <serial number> are replaced with the actual model number and serial
number of the instrument (for example, "k-2601B-PULSE-1234567"). Note that hyphens separate
the characters of hostName.
The length of the fully qualified host name (combined length of the domain and host name with
separator characters) must be less than or equal to 255 characters. Although up to 63 characters can
be entered here, care must be taken to be sure the combined length is no more than 255 characters.
Setting this attribute to an empty string (in other words, setting this attribute to a string of length zero,
or one consisting entirely of whitespace characters) will revert the host name to the factory
default value.
Example
print(lan.config.dns.hostname)
Outputs the present dynamic DNS host name.

Tektronix Keithley 2601B-PULSE Specifications

General

Brand	Tektronix
Model	Keithley 2601B-PULSE
Category	Measuring Instruments
Language	English