Model 2601B-PULSE System SourceMeter Instrument Reference Manual Section 9: Introduction to TSP operation
2601B-PULSE-901-01A April 2020 9-19
tspnet.read() (on page 11-383)
tspnet.readavailable() (on page 11-384)
tspnet.reset() (on page 11-385)
tspnet.termination() (on page 11-385)
tspnet.timeout (on page 11-386)
tspnet.tsp.abort() (on page 11-387)
tspnet.tsp.abortonconnect (on page 11-387)
tspnet.tsp.rbtablecopy() (on page 11-388)
tspnet.tsp.runscript() (on page 11-389)
tspnet.write() (on page 11-390)
Userstrings
Use the functions in this group to store and retrieve user-defined strings in nonvolatile memory. These
strings are stored as key-value pairs. The key is a unique identifier such as a part number or
identification string.
You can use the userstring functions to store custom, instrument-specific information in the
instrument, such as department number, asset number, or manufacturing plant location.
userstring.add() (on page 11-390)
userstring.catalog() (on page 11-391)
userstring.delete() (on page 11-392)
userstring.get() (on page 11-393)
Factory scripts
The Keithley Instruments 2601B-PULSE System SourceMeter
®
Instrument is shipped with one or
more factory scripts saved in its flash firmware memory. A factory script is made up of a number of
functions. Some of them can be called from the front-panel LOAD TEST menu. All of them can be
called using remote programming.
As Keithley Instruments develops additional factory scripts, they will be made available on
tek.com/keithley as a flash firmware upgrade for the 2601B-PULSE. See Upgrading the firmware (on
page 8-5) for instructions on upgrading the flash firmware of your 2601B-PULSE instrument.
To Next Page
Loading...
Need help?
General
