Tektronix Keithley 2601B-PULSE

Model 2601B-PULSE System SourceMeter Instrument Reference Manual Section 11: TSP command reference
2601B-PULSE-901-01A April 2020 11-3
Settings ignored when the pulser is enabled
The following source-measure unit (SMU) settings are ignored when the pulser is enabled:
• display.smua.limit.func
• smua.measure.autorangeY
• smua.measure.autozero
• smua.measure.delay
• smua.measure.highcrangedelayfactor
• smua.measure.lowrangeY
• smua.measure.nplc
• smua.measure.rangeY
• smua.sense
• smua.source.autorangeY
• smua.source.delay
• smua.source.func
• smua.source.highc
• smua.source.limitY
• smua.source.lowrangeY
• smua.source.offlimitY
• smua.source.rangeY
• smua.source.settling
• smua.source.sink
• smua.trigger.endpulse.action
• smua.trigger.endsweep.action
Settings ignored when the pulser is disabled
The following pulser settings do not affect source-measure unit (SMU) operation when the pulser
is disabled:
• smua.pulser.measure.aperture
• smua.pulser.measure.delay
• smua.pulser.protect.sensev
• smua.pulser.protect.sourcev
• smua.pulser.rangeY