Model 2601B-PULSE System SourceMeter Instrument Reference Manual Section 9: Introduction to TSP operation
2601B-PULSE-901-01A April 2020 9-15
Status model
The status model is a set of status registers and queues. You can use the following commands to
manipulate and monitor these registers and queues to view and control various instrument events.
status.condition (on page 11-263)
status.measurement.* (on page 11-265)
status.measurement.buffer_available.* (on page 11-267)
status.measurement.current_limit.* (on page 11-268)
status.measurement.instrument.* (on page 11-270)
status.measurement.instrument.smua.* (on page 11-271)
status.measurement.reading_overflow.* (on page 11-274)
status.measurement.voltage_limit.* (on page 11-276)
status.node_enable (on page 11-277)
status.node_event (on page 11-279)
status.operation.* (on page 11-281)
status.operation.calibrating.* (on page 11-283)
status.operation.instrument.* (on page 11-284)
status.operation.instrument.digio.* (on page 11-286)
status.operation.instrument.digio.trigger_overrun.* (on page 11-288)
status.operation.instrument.lan.* (on page 11-290)
status.operation.instrument.lan.trigger_overrun.* (on page 11-292)
status.operation.instrument.smua.* (on page 11-294)
status.operation.instrument.smua.trigger_overrrun.* (on page 11-296)
status.operation.instrument.trigger_blender.* (on page 11-298)
status.operation.instrument.trigger_blender.trigger_overrun.* (on page 11-299)
status.operation.instrument.trigger_timer.* (on page 11-301)
status.operation.instrument.trigger_timer.trigger_overrun.* (on page 11-302)
status.operation.instrument.tsplink.* (on page 11-304)
status.operation.instrument.tsplink.trigger_overrun.* (on page 11-305)
status.operation.measuring.* (on page 11-307)
status.operation.remote.* (on page 11-308)
status.operation.sweeping.* (on page 11-310)
status.operation.trigger_overrun.* (on page 11-311)
status.operation.user.* (on page 11-313)
status.questionable.* (on page 11-316)
status.questionable.calibration.* (on page 11-318)
status.questionable.instrument.* (on page 11-319)
status.questionable.instrument.smua.* (on page 11-320)
status.questionable.over_temperature.* (on page 11-322)
status.questionable.unstable_output.* (on page 11-323)
status.request_enable (on page 11-324)
status.request_event (on page 11-326)
status.reset() (on page 11-328)
status.standard.* (on page 11-329)
status.system.* (on page 11-331)
status.system2.* (on page 11-333)
status.system3.* (on page 11-335)
status.system4.* (on page 11-338)
status.system5.* (on page 11-340)
To Next Page
Loading...
Need help?
General
