Tektronix Keithley 2601B-PULSE Reference Manual

Section 11: TSP command reference Model 2601B-PULSE System SourceMeter Instrument Reference Manual
11-82 2601B-PULSE-901-01A April 2020
eventlog.overwritemethod
This attribute controls how the event log processes events if the event log is full.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Attribute (RW)
Yes
Instrument reset
Recall setup
Not saved
1 (eventlog.DISCARD_OLDEST)
Usage
method = eventlog.overwritemethod
eventlog.overwritemethod = method
method
Set to one of the following values:
▪ 0 or eventlog.DISCARD_NEWEST: New entries are not logged
▪ 1 or eventlog.DISCARD_OLDEST: Old entries are deleted as new events
are logged
Details
When this attribute is set to eventlog.DISCARD_NEWEST, new entries are not logged.
When this attribute is set to eventlog.DISCARD_OLDEST, the oldest entry is discarded when a new
entry is added.
Example
eventlog.overwritemethod = 0
When the log is full, the event log will ignore new entries.
Also see
eventlog.all() (on page 11-78)
eventlog.clear() (on page 11-79)
eventlog.count (on page 11-79)
eventlog.enable (on page 11-80)
eventlog.next() (on page 11-81)
exit()
This function stops a script that is presently running.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Function
No
Usage
exit()
Details
Terminates script execution when called from a script that is being executed.
This command does not wait for overlapped commands to complete before terminating script
execution. If overlapped commands are required to finish, use the waitcomplete() function before
calling exit().

Tektronix Keithley 2601B-PULSE Specifications

General

Brand	Tektronix
Model	Keithley 2601B-PULSE
Category	Measuring Instruments
Language	English