Tektronix Keithley 2601B-PULSE Reference Manual

Model 2601B-PULSE System SourceMeter Instrument Reference Manual Section 11: TSP command reference
2601B-PULSE-901-01A April 2020 11-369
tsplink.state
This attribute describes the TSP-Link online state.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Attribute (R)
Yes
Not applicable
Not applicable
Not applicable
Usage
state = tsplink.state
state
TSP-Link state (online or offline)
Details
When the instrument power is first turned on, the state is offline. After tsplink.reset() is
successful, the state is online.
Example
state = tsplink.state
print(state)
Read the state of the TSP-Link system. If it is online, the output is:
online
Also see
tsplink.node (on page 11-366)
tsplink.reset() (on page 11-368)
tsplink.trigger[N].assert()
This function simulates the occurrence of the trigger and generates the corresponding event ID.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Function
Yes
Usage
tsplink.trigger[N].assert()
N
The trigger line (1 to 3)
Details
The set pulse width determines how long the trigger is asserted.
Example
tsplink.trigger[2].assert()
Asserts trigger on trigger line 2.
Also see
tsplink.trigger[N].clear() (on page 11-370)
tsplink.trigger[N].mode (on page 11-371)
tsplink.trigger[N].overrun (on page 11-372)
tsplink.trigger[N].pulsewidth (on page 11-373)
tsplink.trigger[N].release() (on page 11-374)
tsplink.trigger[N].stimulus (on page 11-375)
tsplink.trigger[N].wait() (on page 11-376)

Tektronix Keithley 2601B-PULSE Specifications

General

Brand	Tektronix
Model	Keithley 2601B-PULSE
Category	Measuring Instruments
Language	English