Section 2: Installation Model 2601B-PULSE System SourceMeter Instrument Reference Manual
2-14 2601B-PULSE-901-01A April 2020
5. Select File > Open Instrument to open the instrument you named in the wizard.
Figure 12: Keithley Communicator Open an Instrument
6. Select OK.
7. Send a command to the instrument and see if it responds.
If you have a full version of NI-VISA on your system, you can run NI-MAX or the VISA Interactive
Utility. See their documentation for information.
If you have the Keysight IO Libraries on your system, you can run Keysight Connection Expert to
review your USB instruments. See their documentation for information.
Connecting multiple USB instruments to the computer
The most convenient way to connect USB instrumentation to the computer is to plug a USB cable
directly from the instrument to the computer. If you have more than one USB instrument or have other
USB devices, such as printers, keyboards, and mice, you might not have enough USB connectors on
the computer.
To gain more ports, you can use a USB hub or add more USB controller cards if you have available
PCI or PCI Express slots.
To Next Page
Loading...
Need help?
General
