Section 11: TSP command reference Model 2601B-PULSE System SourceMeter Instrument Reference Manual
11-4 2601B-PULSE-901-01A April 2020
Using the TSP command reference
The Test Script Processor (TSP
®
) command reference contains detailed descriptions of each of the
TSP commands that you can use to control your instrument. Each command description is broken
into subsections. The figure below shows an example of a command description.
Figure 139: Example instrument command description
The subsections contain information about the command. The subsections are:
• Command name and summary table
• Usage
• Details
• Example
• Also see
The content of each of these subsections is described in the following topics.
Command name and summary table
Each instrument command description starts with the command name, followed by a brief description
and a table with relevant information for each command. Definitions for the numbered items in the
figure below are listed following the figure.
To Next Page
Loading...
Need help?
General
