Model 2601B-PULSE System SourceMeter Instrument Reference Manual Section 11: TSP command reference
2601B-PULSE-901-01A April 2020 11-81
eventlog.next()
This function returns the oldest unread event message from the event log and removes it from the event log.
Usage
logString = eventlog.next()
Details
Returns the next entry from the event log and removes it from the log.
If there are no entries in the event log, returns the value nil.
Example 1
Get the oldest message in the event log and remove that entry from the log.
Output:
17:28:22.085 10 Oct 2019, LAN2, 192.168.1.102, LXI, 0, 1570728502, <no time>, 0, 0x0
Example 2
If you send this command when there is nothing in the event log, you will get the following output:
nil
Also see
eventlog.all() (on page 11-78)
eventlog.clear() (on page 11-79)
eventlog.count (on page 11-79)
eventlog.enable (on page 11-80)
eventlog.overwritemethod (on page 11-82)