Model 2601B-PULSE System SourceMeter Instrument Reference Manual Section 10: Instrument programming
2601B-PULSE-901-01A April 2020 10-61
TSP-Net instrument commands: General device control
The following instrument commands provide general device control:
tspnet.clear() (on page 11-379)
tspnet.connect() (on page 11-380)
tspnet.disconnect() (on page 11-381)
tspnet.execute() (on page 11-382)
tspnet.idn() (on page 11-383)
tspnet.read() (on page 11-383)
tspnet.readavailable() (on page 11-384)
tspnet.reset() (on page 11-385)
tspnet.termination() (on page 11-385)
tspnet.timeout (on page 11-386)
tspnet.write() (on page 11-390)
TSP-Net instrument commands: TSP-enabled device control
The following instrument commands provide TSP-enabled device control:
tspnet.tsp.abort() (on page 11-387)
tspnet.tsp.abortonconnect (on page 11-387)
tspnet.tsp.rbtablecopy() (on page 11-388)
tspnet.tsp.runscript() (on page 11-389)
To Next Page
Loading...
Need help?
General
