Section 12: Troubleshooting guide Model 2601B-PULSE System SourceMeter Instrument Reference Manual
12-4 2601B-PULSE-901-01A April 2020
Invalid flow control setting
Maximum GPIB message length exceeded
Display area boundary exceeded
Invalid digital trigger mode
Cannot flash with error in queue
Lan configuration already in progress
Could not acquire ip address
Could not resolve hostname
Connection not established
Cannot read current working directory
File system command not supported
Invalid specified connection
Invalid timeout seconds (.001 to 30)
TSPnet remote error: XXX, where XXX explains the remote error
TSPnet read failure, aborted
TSPnet read failure, timeout
TSPnet write failure, aborted
TSPnet write failure, timeout
TSPnet max connections reached
TSPnet invalid termination
TSPnet invalid reading buffer table