Xerox Phaser 6128MFP - Page 132

3-12 Phaser 6128MFP Service Manual
Error Messages and Codes
FAX
Controller
Fax Job Canceled
Error 033-790
Press OK Button
<Cancel>
The Cancellation occurred.
page 3-135
FAX
Controller
Fax Job Canceled
Error 033-791
Press OK Button
<Cancel>
The Cancellation occurred.
page 3-135
FAX
Controller
Fax Send Error
Last Sheet not Sent
Press OK Button
<FAX Send Count Limit>
The Outgoing FAX exceeds
store limit.
page 3-133
FAX
Controller
Fax Codec Error
Error 033-799
Press OK Button
<Line Count Limit Over>
The Line Count per Page
Exceeds Limit at MH/HR/MMR
Reception.
page 3-148
FAX
Controller
Fax Communication
Error
Error 034-508
Press OK Button
<Command Refuse Signal
Send>
The Communication Aborted
Sending Command Rejection
Code.
page 3-148
FAX
Controller
Fax Communication
Error
Error 034-515
Press OK Button
<DIS DCS Illegal Command
Receive>
Unsupported Command
received.
page 3-146
FAX
Controller
Fax Number Error
Error 034-799
Press OK Button
<No Dial Data>
The Autodial Started but No
Data Ready.
page 3-139
FAX
Controller
Targe t Fa x No An s wer
Error 035-701
Press OK Button
<Send T1 Time Out>
The T1 Time Out error
occurred at the data is
transmitting.
page 3-147
FAX
Controller
Fax Communication
Error
Error 035-702
Press OK Button
<Receive DCN>
Receiving the DCN.
page 3-148
FAX
Controller
Fax Communication
Error
Error 035-704
Press OK Button
<Not Send Ability>
Source Lacking Send Capacity.
page 3-148
FAX
Controller
Fax Communication
Error
Error 035-705
Press OK Button
<DCS/NSS Resend Over>
Exceeds the predetermined
value of the resending.
page 3-148
FAX
Controller
Fax Communication
Error
Error 035-706
Press OK Button
<Fall Back Error>
The Fall Back error occurred.
page 3-137
Error Message Summary (continued)
System Error Message Error Type Go to