3-114 Phaser 6128MFP Service Manual
Error Messages and Codes
Memory Errors
A memory access error occurred. This troubleshooting procedure applies to these
errors.
Applicable Errors
• 016-500: Erase Flash Error
• 016-501: Write Flash Error
• 016-502: Verify Flash Error
• 116-310: Font ROM Error
• 116-314: MAC Address Error
• 116-315: RAM Error
• 116-317: Controller Error
• 116-323: NVRAM Error
• 116-324: Controller Error
• 116-326: NVRAM Error
• 116-327: Controller Error
• 116-328: Controller Error
• 116-343: ASIC Error
• 116-350: Network Error
• 116-351: Network Error
• 116-352: Network Error
• 116-355: Network Error
• 116-390: NVRAM Error
• 117-365: Verify Flash Error
• 131-397: Verify Flash Error
Initial Actions
• Cycle printer power.
• If the problem persists, follow the procedure below.
Troubleshooting Reference Table
Applicable Parts Wiring and Plug/Jack Map References
■ Image Processor Board, PL10.6.6
To Next Page
Loading...
