8-100 Phaser 6128MFP Service Manual
Service Parts Disassembly
Transfer Belt Pivot Kit
PL 6.1.99
This procedure removes the pivot shafts for the Transfer Belt.
1. Open the Front Cover.
2. Remove the Left Side Cover (page 8-17).
3. Remove the Outer Pole Cover (page 8-19).
4. Remove the Rear Cover (page 8-22).
5. Remove the Right Side Cover (page 8-23).
6. Remove the Top Cover (page 8-25).
7. Remove the Front Cover (page 8-15).
8. Rotate the Pivot Stopper to align the tabs of the Pivot Stopper with the
notches of the Main Drive Assembly.
9. Remove the Pivot Stopper from the printer.
s6128mfp-239
To Next Page
Loading...
