Phaser 6128MFP Service Manual 3-91
Error Messages and Codes
PAGEC Timer Error
A system error has occurred. This troubleshooting procedure applies to this error.
Applicable Error
• 024-362: PAGEC Timer Error
Initial Actions
• Cycle printer power.
• If the problem persists, follow the procedure below.
Troubleshooting Reference Table
Applicable Parts Wiring and Plug/Jack Map References
■ Image Processor Board, PL10.6.6 ■ “Map 3 - Electrical and Drive” on page 10-8
Troubleshooting Procedure Table
Step Actions and Questions Yes No
1 Check the Image Processor Board
installation.
Cycle system power.
Does the error persist?
Replace the I/P
Board
(page 8-41).
Complete.
To Next Page
Loading...
