Xerox Phaser 6128MFP - Supported Paper and Media

1-18 Phaser 6128MFP Service Manual
General Information
First Print Output Time (FPOT)
First Print Output Time is defined as a time from when the engine receives a Start
signal in Ready state, until a single page is printed and delivered to the output tray.
The following conditions are applied:
• The Controller does not keep the print engine waiting
• The printer is at Ready mode
• Paper is A size Short Edge Feed (SEF)
• Process control time is not included
First Copy Output Time
First Copy Output Time (FCOT) is defined as the time when the Start button is
pressed until the trail edge of the first copied media passes the printer Exit Roller.
The following conditions are applied:
• The Controller does not keep the print engine waiting.
• The printer is at Ready mode (Laser Unit Motor Off, Fuser Ready).
• Paper is A size Short-Edge Feed (SEF).
• Document is on the document glass (Document setting: Platen mode).
• Media: Media feed from the standard media tray.
Mode Tray FPOT (sec.)
Color Tray As fast as 17.0 sec.
Manual Feed As fast as 17.0 sec.
Mono Tray As fast as 14.0 sec.
Manual Feed As fast as 14.0 sec.
Mode FCOT (sec.)
Color Less than 30.0 sec.
Mono Less than 21.0 sec.