Xerox Phaser 6128MFP - Page 263

Phaser 6128MFP Service Manual 3-143
Error Messages and Codes
• 133-273: Fax Error
• 133-274: Fax Error
• 133-275: Fax Error
• 133-276: Fax Error
• 133-277: Fax Error
• 133-278: Fax Error
• 133-279: Fax Error
• 133-280: Fax Error
• 133-281: Fax Error
• 133-282: Fax Error
• 133-283: Fax Error
• 133-286: Fax Error
• 133-287: Fax Error
• 133-288: Fax Error
• 133-289: Fax Error
• 133-290: Fax Error
Initial Actions
• Cycle printer power.
• If the problem persists, follow the procedure below.
Troubleshooting Reference Table
Applicable Parts Wiring and Plug/Jack Map References
■ Image Processor Board, PL10.6.6
“Imaging” on page 10-24
Troubleshooting Procedure Table
Step Actions and Questions Yes No
1 Check the system firmware.
Is the system firmware current?
Reseat
connections to
the I/P Board,
then go to step
2.
Reload system
firmware.
2 Cycle system power.
Does the error persist?
Replace the I/P
Board
(page 8-41)
Complete.