Xerox Phaser 6128MFP - Page 491

Phaser 6128MFP Service Manual 8-67
Service Parts Disassembly
8. Remove the 7 screws (silver, M4, 6mm) and the 2 screws (silver, tap, 8mm)
that secure the LVPS card cage to the chassis
9. Lift the card cage slightly and pull it from the chassis while feeding the cables
through the holes provided.
Replacement Note
Lift the card cage over the screw located at the lower right corner of the
chassis.
s6128mfp-199
8mm
6mm
6mm
6mm
6mm
6mm
6mm
6mm
8mm