ABB AC500 V3 - 2.6.5.2 MC5102 - Micro memory card with micro memory card adapter

*) Modules in lifecycle Classic are available from stock but not recommended
for planning and commissioning of new installations.
2.6.5.2 MC5102 - Micro memory card with micro memory card adapter
● Solid state flash memory storage
1 Micro memory card
2 TA5350-AD micro memory card adapter
The MC5102 micro memory card has no write protect switch.
The TA5350-AD micro memory card adapter has a write protect switch.
In the position "LOCK", the inserted micro memory card can only be read.
Memory card type AC500 V2 AC500-XC
V2
AC500-
eCo V2
3
)
AC500 V3 AC500-XC
V3
AC500-
eCo V3
MC502 x x x x x -
MC5141 x x x x x -
MC5102 with TA5350-AD micro
memory card adapter
x
1
) x
1
)
2
) x
1
)
x
x
2
)
-
MC5102 without TA5350-AD micro
memory card adapter
- - - - - x
1
) As of firmware 2.5.x
2
) Temporary use of MC5102 is possible under normal environmental conditions, but MC5141
should be preferred.
3
) A memory card can only be inserted when a MC503 memory card adapter is installed in the
processor module.
System assembly, construction and connection
AC500 (Standard) > Handling of accessories
2022/01/31 3ADR010278, 3, en_US 1005