ABB AC500 V3 - Technical data of the fast counter; 1.7.2.2.12 Ordering data

Parameter Value
Bipolar Voltage
Galvanic isolation Against internal supply and other modules
Configurability -10...+10 V, 0...20 mA, 4...20 mA (each output
can be configured individually)
Output resistance (load), as current output 0...500 W
Output loadability, as voltage output ±10 mA max.
Indication of the output signals 1 LED per channel (brightness depends on the
value of the analog signal)
Resolution 12 bits (+ sign)
Settling time for full range change (resistive
load, output signal within specified tolerance)
Typ. 5 ms
Conversion error of the analog values
caused by non-linearity, adjustment error
at factory and resolution within the normal
range
Typ. 0.5 %, max. 1 %
Relationship between input signal and hex
code
See Ä Chapter 1.7.2.2.10.3 “Output ranges
voltage and current” on page 651
Unused outputs Are configured as "unused" (default value) and
can be left open-circuited
Technical data of the fast counter
Parameter Value
Used inputs Terminal 3.0 (DI0), 3.1 (DI1)
Used outputs Terminal 4.0 (DO0)
Counting frequency Depending on operation mode:
Mode 1 - 6: max. 200 kHz
Mode 7: max. 50 kHz
Mode 9: max. 35 kHz
Mode 10: max. 20 kHz
Detailed description
Fast Counter Ä Chapter 1.6.1.2.9 “Fast
counter” on page 349
Operating modes
Operating modes Ä Chapter 1.6.1.2.9 “Fast
counter” on page 349
1.7.2.2.12 Ordering data
Part no. Description Product life cycle phase *)
1SAP 228 100
R0001
CI581-CN, CANopen
communication interface module with
8 DI, 8 DO, 4 AI and 2 AO
Active
1SAP 428 100
R0001
CI581-CN-XC, CANopen
communication interface module with
8 DI, 8 DO, 4 AI and 2 AO, XC version
Active
Device specifications
Communication interface modules (S500) > CANopen
2022/01/313ADR010278, 3, en_US656