ABB AC500 V3 - Connection of the digital transistor outputs (PM50 xx-T-ETH only); Connection of the digital relay outputs (PM50 xx-R-ETH only)

Connection of the digital transistor outputs (PM50xx-T-ETH only)
Fig. 2: Connection of digital transistor outputs and configurable digital inputs/outputs
C12 used as configurable digital input
C13 used as configurable digital transistor output
CAUTION!
Risk of damaging the processor module!
The outputs are not protected against short circuit and overload.
– Never short-circuit or overload the outputs.
– Never connect the outputs to other voltages.
– Use an external fuse for the outputs.
Connection of the digital relay outputs (PM50xx-R-ETH only)
The following figures show the connection of the digital relay outputs to the processor modules:
Device specifications
Processor modules > AC500-eCo
2022/01/31 3ADR010278, 3, en_US 33