ABB AC500 V3 - 2.5.5.5 TA543 - Screw mounting accessory

Table 194: Technical data of the module
Parameter Value
Process supply voltage
Connections Terminal (L+) for +24 V DC and terminal (M) for
0 V DC
Rated value 24 V DC
Max. ripple 5 %
Protection against reversed voltage Yes
Galvanic isolation Yes (on processor module PM50xx)
Isolated Groups 1 (6 channels per group)
Weight 18 g
Mounting position Horizontal or vertical
Table 195: Technical data of the inputs
Parameter Value
Number of channels per module 6 digital input channels (+24 V DC)
Distribution of the channels into groups 1 (6 channels per group)
Connections of channels I0 to I5 Terminals 2...7
Reference potential for the channels I0 to I5 Terminal 1 (negative pole of the process supply
voltage, signal name C0...5)
Input current per active channel (at input
voltage +24 V DC)
The current is given through the used pro-
cessor module.
Typ. 5 mA
Inrush current per active channel
The current is given through the used pro-
cessor module.
Typ. 5 mA
Part no. Description Product life cycle phase *)
1SAP 187 600 R0001 TA5400-SIM, input simulator
for PM50x2
Active
*) Modules in lifecycle Classic are available from stock but not recommended
for planning and commissioning of new installations.
2.5.5.5 TA543 - Screw mounting accessory
The TA543 screw mounting accessory is used for mounting the processor module PM50xx
without DIN rail.
Ordering data
Intended pur-
pose
System assembly, construction and connection
AC500-eCo > Handling of accessories
2022/01/31 3ADR010278, 3, en_US 969