ABB AC500 V3 - Connection of the digital inputs

DI0 1.0
DI1 1.1
DI2 1.2
DI3 1.3
DI4 1.4
DI5 1.5
DI6 1.6
DI7 1.7
DI8 2.0
DI9 2.1
DI10 2.2
DI11 2.3
DI12 2.4
DI13 2.5
DI14 2.6
DI15 2.7
+
-
AI0 3.0
+
-
AI1 3.1
+
-
AI2 3.2
+
-
AI3 3.3
AO03.5
AO13.7
AI- 3.4
AO-3.8
DC164.0
DC174.1
DC184.2
DC194.3
DC204.4
DC214.5
DC224.6
DC234.7
PTCPTC
1.8
3.82.8
4.8
UP +24 V DC
1.9
3.92.9
4.9
ZP 0 V
+
-
+
-
Fig. 72: Terminal assignment of the module
The module provides several diagnosis functions Ä Chapter 1.6.3.1.1.7 “Diagnosis”
on page 569.
Connection of the digital inputs
The following figure shows the connection of the digital input DI0. Proceed with the digital inputs
DI1 to DI15 in the same way.
Fig. 73: Connection of the module
The meaning of the LEDs is described in the Displays Ä Chapter 1.6.3.1.1.8 “State LEDs”
on page 572 chapter.
Device specifications
I/O modules > Digital/Analog I/O modules
2022/01/31 3ADR010278, 3, en_US 553