ABB AC500 V3 - 1.3.1.2.3 TA5110-2 DI2 DOT - Option board for digital I;O extension

Part no. Description Product life cycle phase *)
1SAP 187 000 R0002 TA5105-4DOT: AC500, option board
for digital I/O extension, 4DO-T 24 V
DC / 0.5 A, spring/cable front terminal
3.50 mm pitch
Active
Spare parts
1SAP 187 400 R0014
**)
TA5220-SPF7: spring terminal block,
removable, 7-pin, spring front, cable
front, 6 pieces per packing unit
Active
*) Modules in lifecycle Classic are available from stock but not recommended
for planning and commissioning of new installations.
**) The needed spring terminal block is always delivered with the option board.
The terminal block listed in the table is for spare part only if needed.
1.3.1.2.3 TA5110-2DI2DOT - Option board for digital I/O extension
● 2 digital inputs 24 V DC (I0 to I1) in 1 group
● 2 digital transistor outputs 24 V DC (O0 to O1) in 1 group
● Group-wise galvanically isolated
1 2 yellow LEDs to display the signal states of the outputs O0 to O1
2 2 yellow LEDs to display the signal states of the inputs I0 to I1
3 Allocation of signal name
4 7-pin terminal block for input/output signals
Ordering data
Device specifications
Processor modules > AC500-eCo
2022/01/313ADR010278, 3, en_US64