ABB AC500 V3 - Connection of the digital outputs; Connection of the configurable digital inputs;outputs

+
-
AI0 3.0
+
-
AI1 3.1
+
-
AI2 3.2
+
-
AI3 3.3
AO03.5
AO13.6
AI- 3.4
AO-3.7
PTCPTC
1.8
3.82.8
UP +24 V DC
1.9
3.92.9
ZP 0 V
+
-
+
-
DC164.0
DC174.1
DC184.2
DC194.3
DC204.4
DC214.5
DC224.6
DC234.7
4.8
4.9
D001.0
D011.1
DO21.2
DO31.3
DO41.4
DO51.5
DO61.6
DO71.7
D082.0
D092.1
DO102.2
DO112.3
DO122.4
DO132.5
DO142.6
DO152.7
Fig. 86: Terminal assignment of the module
The module provides several diagnosis functions Ä Chapter 1.6.3.1.2.7 “Diagnosis”
on page 603.
Connection of the digital outputs
The following figure shows the connection of the digital output DO0. Proceed with the digital
outputs DO1 to DO15 in the same way.
For a description of the meaning of the LEDs, please refer to the Displays chapter Ä Chapter
1.6.3.1.2.8 “State LEDs” on page 606.
Connection of the configurable digital inputs/outputs
The following figure shows the connection of the configurable digital input/output DC16 and
DC17. DC16 is connected as an input and DC17 is connected as an output. Proceed with the
configurable digital inputs/outputs DC18 to DC23 in the same way.
Device specifications
I/O modules > Digital/Analog I/O modules
2022/01/31 3ADR010278, 3, en_US 587