ABB AC500 V3 - Technical data of the fast counter; Ordering data

Parameter Value
Output switching capacity (XC ver-
sion above 60 °C)
On request
Lifetime (cycles) Mechanical: 300 000;
Under load: 300 000 (24 V DC at 2 A), 200 000 (120 V
AC at 2 A), 100 000 (230 V AC at 3 A)
Spark suppression with inductive AC
load
Must be performed externally according to driven load
specifications
Demagnetization with inductive DC
load
A free-wheeling diode must be circuited in parallel to
the inductive load
Switching frequency
With resistive load Max. 10 Hz
With inductive load Max. 2 Hz
With lamp load On request
Max. cable length
Shielded 1000 m
Unshielded 600 m
Technical data of the fast counter
The fast counter of the module does not work if the module is connected to a
– FBP interface module
– CS31 bus module
– CANopen communication interface module
Parameter Value
Used inputs I0 / I1
Used outputs None
Counting frequency 50 kHz max.
Detailed description See
Ordering data
Part no. Description Product life cycle phase *)
1SAP 245 200 R0001 DX522, digital input/output module,
8 DI, 24 V DC, 8 DO relays
Active
1SAP 445 200 R0001 DX522-XC, digital input/output
module, 8 DI, 24 V DC, 8 DO relays,
XC version
Active
Device specifications
I/O modules > Digital I/O modules
2022/01/313ADR010278, 3, en_US338