ABB AC500 V3 - 1.8.2.6 TA526 - Wall mounting accessory; 1.8.3 S500; 1.8.3.1 TA523 - Pluggable label mounting

Part no. Description Product life cycle phase *)
1SAP 180 600 R0001 TA524, dummy communica-
tion module
Active
*) Modules in lifecycle Classic are available from stock but not recommended
for planning and commissioning of new installations.
1.8.2.6 TA526 - Wall mounting accessory
If a terminal base TB5xx or a terminal unit TU5xx should be mounted with screws, the wall
mounting accessories TA526 must be inserted at the rear side first. This plastic parts prevent
bending of terminal bases and terminal units while screwing up.
Handling of the wall mounting accessory is described in detail in the section Mounting and
disassembling the terminal unit Ä “Mounting with screws” on page 984 and Mounting/Disas-
sembling Terminal Bases and Function Module Terminal Bases
Ä “Mounting with screws”
on page 982.
Parameter Value
Weight 5 g
Dimensions 67 mm x 35 mm x 5,5 mm
Part no. Description Product life cycle phase *)
1SAP 180 800 R0001 TA526, wall mounting acces-
sory
Active
*) Modules in lifecycle Classic are available from stock but not recommended
for planning and commissioning of new installations.
1.8.3 S500
1.8.3.1 TA523 - Pluggable label mounting
For labelling the channels of S500 I/O modules.
Ordering data
Purpose
Handling
instructions
Technical data
Ordering data
Device specifications
Accessories > S500
2022/01/313ADR010278, 3, en_US902