1 Pluggable label mounting TA523
2 Plastic labels to be inserted into the holder
The pluggable label mounting is used to hold 4 plastic labels, on which the meaning of the I/O
channels of I/O modules can be written down. The holder is transparent so that after snapping it
onto the module the LEDs shine through.
The plastic labels can be printed out from TA563.doc http://new.abb.com/products/
ABB1SAP180500R0001.
Parameter Value
Use For labelling channels of I/O modules
Mounting Snap-on to the module
Weight 20 g
Dimensions 82 mm x 67 mm x 13 mm
Purpose
Handling
instructions
Technical data
2022/01/31 3ADR010278, 3, en_US 903
To Next Page
Loading...
