Functionality
Parameter Value
LED displays For signal states
Internal power supply Via I/O bus
External power supply Via the terminals ZP and UP (process supply voltage
24 V DC)
Connections
For a detailed description of the mounting, disassembly and connection of the
module, please refer to the System Assembly chapter
Ä
Chapter 2.5 “AC500-
eCo” on page 925.
The connection is carried out by using removable 9-pin and 11-pin terminal blocks. These
terminal blocks differ in their connection system (spring terminals or screw terminals, cable
mounting from the front or from the side). The terminal blocks are not included in the module's
scope of delivery and must be ordered separately.
The following block diagram shows the internal construction of the digital outputs:
O0 11
O1 12
O2 13
O3 14
O4 15
O5 16
O6 17
O7 18
−−− 10
UP 19
ZP 20
Table 66: Assignment of the terminals:
Terminals Signal Description
10 --- Reserved
11 O0 Output signal O0
12 O1 Output signal O1
13 O2 Output signal O2
14 O3 Output signal O3
15 O4 Output signal O4
I/O modules > Digital I/O modules
2022/01/31 3ADR010278, 3, en_US 195
To Next Page
Loading...
