Functionality
Parameter Value
LED displays For signal states
Internal power supply Via I/O bus
External power supply Not necessary
Connections
For a detailed description of the mounting, disassembly and connection of the
module, please refer to the System Assembly chapter
Ä
Chapter 2.5 “AC500-
eCo” on page 925.
The connection is carried out by using removable 9-pin and 11-pin terminal blocks. These
terminal blocks differ in their connection system (spring terminals or screw terminals, cable
mounting from the front or from the side). The terminal blocks are not included in the module's
scope of delivery and must be ordered separately.
I1 2
I0 1
I3 4
I2 3
I5 6
I4 5
I7 8
I6 7
I9 11
I8 10
LI11 13
I10 12
I13 15
I12 14
I15 17
I14 16
N0..7 9
N8..15 18
--- 19
--- 20
Fig. 6: Block diagram for the internal construction of the digital inputs.
I/O modules > Digital I/O modules
2022/01/313ADR010278, 3, en_US186
To Next Page
Loading...
