ABB AC500 V3 - 1.7.3.1.12 Ordering data; 1.7.3.2 CI512-ETHCAT

Parameter Value
Output resistance (load),
as current output
0 ... 500 W
Output loadability,
as voltage output
± 10 mA max.
Indication of the output signals 1 LED per channel (brightness depends on the
value of the analog signal)
Resolution 12 bits (+ sign)
Settling time for full range change (resistive
load, output signal within specified tolerance)
Typ. 5 ms
Conversion error of the analog values
caused by non-linearity, adjustment error
at factory and resolution within the normal
range
Typ. 0.5 %, max. 1 %
Relationship between input signal and hex
code
Table Output Ranges Voltage and Current
Ä Chapter 1.7.3.1.10.3 “Output ranges voltage
and current” on page 705
Unused outputs Are configured as unused (default value) and
can be left open-circuited
1.7.3.1.12 Ordering data
Part no. Description Product life cycle phase *)
1SAP 220 900 R0001 CI511-ETHCAT, EtherCAT communi-
cation interface module, 8 DI, 8 DO,
4 AI and 2 AO
Active
*) Modules in lifecycle Classic are available from stock but not recommended
for planning and commissioning of new installations.
1.7.3.2 CI512-ETHCAT
● 8 digital inputs 24 V DC
● 8 digital outputs 24 V DC, 0.5 A max.
● 8 configurable digital inputs/outputs 24 V DC, 0.5 A max.
● Cam switch functionality (see also Extended Cam Switch Library)
● Extended Cam switch functionality *)
(see also Extended Cam Switch Library)
● Module-wise galvanically isolated
● Expandability with up to 10 S500 I/O modules *)
*) Applicable for device index C0 and above.
Device specifications
Communication interface modules (S500) > EtherCAT
2022/01/31 3ADR010278, 3, en_US 711