Part no. Description
1SAP 182 800 R0001 TA543: screw mounting accessory, 20 pieces per packing unit
1SAP 187 500 R0003 TA5301-CFA: cable fixing part accessory, 20 pieces per packing unit
Spare parts
1SAP 187 400 R0012 TA5220-SPF5: spring terminal block, removable, 5-pin, spring front,
cable front, 6 pieces per packing unit
1SAP 187 400 R0013 TA5220-SPF6: spring terminal block, removable, 6-pin, spring front,
cable front, 6 pieces per packing unit
1SAP 187 400 R0014 TA5220-SPF7: spring terminal block, removable, 7-pin, spring front,
cable front, 6 pieces per packing unit
1SAP 187 400 R0015 TA5220-SPF8: spring terminal block, removable, 8-pin, spring front,
cable front, 6 pieces per packing unit
1SAP 187 500 R0001 TA5300-CVR: option board slot cover, removable plastic part, 6
pieces per packing unit
1.3.1.2 Option boards
1.3.1.2.1 TA5101-4DI - Option board for digital I/O extension
● 4 digital inputs 24 V DC (I0 to I3) in 1 group
● Module-wise galvanically isolated
1 4 yellow LEDs to display the signal states of the inputs I0 to I3
2 Allocation of signal name
3 5-pin terminal block for input signals
NOTICE!
Risk of damaging the PLC modules!
Overvoltages and short circuits might damage the PLC modules.
– Make sure that all voltage sources (supply voltage and process supply
voltage) are switched off before you begin with operations on the system.
– Never connect any voltages or signals to reserved terminals (marked with
"NC"). Reserved terminals may carry internal voltages.
Processor modules > AC500-eCo
2022/01/313ADR010278, 3, en_US52
To Next Page
Loading...
