– For information about wiring specifications see the description of the ter-
minal units
Ä
Chapter 2.6.4.3 “Terminals at the terminal unit” on page 990.
– For a detailed description of the mounting, disassembly and connection of
the module, please refer to the System Assembly, Construction and Con-
nection chapter
Ä
Chapter 2.6 “AC500 (Standard)” on page 971.
– For information about mechanical dimensions, please refer to the Mechan-
ical dimensions S500 chapter
Ä
Chapter 2.6.2.3 “Mechanical dimensions
S500” on page 979
The terminals 1.8 to 4.8 and 1.9 to 4.9 are electrically interconnected within the terminal unit
and always have the same assignment, independent of the inserted module:
● Terminals 1.8 to 4.8: process supply voltage UP = +24 V DC
● Terminals 1.9 to 4.9: process supply voltage ZP = 0 V
The assignment of the other terminals depends on the inserted communication interface module
(see the description of the respective module used).
The supply voltage of 24 V DC for the module's circuitry comes from the I/O expansion bus (I/O
bus).
1.5.4.1 Technical data
The system data of AC500 and S500
Ä
Chapter 2.6.1 “System data AC500” on page 971 are
applicable to the standard version.
The system data of AC500-XC
Ä
Chapter 2.7.1 “System data AC500-XC” on page 1023 are
applicable to the XC version.
Only additional details are therefore documented below.
The technical data are also applicable to the XC version.
Terminal units (AC500 standard) > TU531 and TU532 for I/O modules
2022/01/313ADR010278, 3, en_US140
To Next Page
Loading...
