ABB AC500 V3 - 1.8.2.2 MC5102 - Micro memory card with micro memory card adapter

It is not possible to use 100 % of a device's memory space. About 10 % of the
total available space must remain unused at any time to maintain normal device
operation.
Further information on using the memory card in AC500 PLCs is provided in the chapter .
Part no. Description Product life cycle phase *)
1SAP 180 100 R0001 MC502, memory card Classic
*) Modules in lifecycle Classic are available from stock but not recommended
for planning and commissioning of new installations.
1.8.2.2 MC5102 - Micro memory card with micro memory card adapter
● Solid state flash memory storage
1 Micro memory card
2 TA5350-AD micro memory card adapter
The MC5102 micro memory card has no write protect switch.
The TA5350-AD micro memory card adapter has a write protect switch.
In the position "LOCK", the inserted micro memory card can only be read.
Memory card type AC500 V2 AC500-XC
V2
AC500-
eCo V2
3
)
AC500 V3 AC500-XC
V3
AC500-
eCo V3
MC502 x x x x x -
MC5141 x x x x x -
Ordering data
Device specifications
Accessories > AC500 (standard)
2022/01/313ADR010278, 3, en_US888