ABB AC500 V3 - Connection of analog output loads (Voltage)

Fig. 82: Use of analog inputs as digital inputs
The following measuring ranges can be configured Ä Chapter 1.6.3.1.1.6 “Parameterization”
on page 565:
Digital input 24 V 1 channel used
For a description of the function of the LEDs, please refer to the Diagnosis and displays /
Displays chapter Ä Chapter 1.6.3.1.1.8 “State LEDs” on page 572.
Connection of analog output loads (Voltage)
The following figure shows the connection of output loads to the analog output AO0. Proceed
with the analog output AO1 in the same way.
Device specifications
I/O modules > Digital/Analog I/O modules
2022/01/313ADR010278, 3, en_US562