EasyManua.ls Logo

ABB AC500 V3 - 1.3.2 AC500 (standard); 1.3.2.1 PM56 xx-2 ETH for AC500 V3 products

ABB AC500 V3
1029 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1.3.2 AC500 (standard)
1.3.2.1 PM56xx-2ETH for AC500 V3 products
Processor modules with onboard interfaces:
PM5630-2ETH: processor module, memory 8 MB, with Ethernet support (onboard Ethernet)
– 2 network interfaces RJ45, CAN and COM1 on the terminal base.
PM5650-2ETH: processor module, memory 80 MB, with Ethernet support (onboard
Ethernet) – 2 network interfaces RJ45, CAN and COM1 on the terminal base.
PM5670-2ETH: processor module, memory 160 MB, with Ethernet support (onboard
Ethernet) – 2 network interfaces RJ45, CAN and COM1 on the terminal base.
PM5675-2ETH: processor module, 160 MB, 8 GB flash disk, with Ethernet support (onboard
Ethernet) – 2 network interfaces RJ45, CAN and COM1 on the terminal base.
XC version for use in extreme ambient conditions available
1 6 7-segment state displays with backlight
2 "Triangle" displays for "item"
3 "Square" displays for "state"
4 3 state LEDs
5 8 function keys
6 Slot for memory card
7 Label
8 Compartment for lithium battery TA521
9 Lithium battery TA521
10 Memory card
11 I/O bus for connection of I/O modules
12 Slot for processor module (processor module
mounted on terminal base)
13 Slots for communication modules (multiple,
depending on terminal base; unused slots must be
covered with TA524)
Device specifications
Processor modules > AC500 (standard)
2022/01/313ADR010278, 3, en_US90

Table of Contents

Other manuals for ABB AC500 V3

Related product manuals