ABB AC500 V3 - 1.3.2.1.4 LEDs, display and function keys on the front panel; 1.3.2.1.5 Technical data

1.3.2.1.4 LEDs, display and function keys on the front panel
Detailed information on using the LEDs, display and the function keys such
as startup procedure and error coding is described in the system technology
section .
1.3.2.1.5 Technical data
The system data of AC500 and S500 are applicable to the standard version.
Ä Chapter 2.6.1
“System data AC500” on page 971
The system data of AC500-XC are applicable to the XC version. Ä Chapter 2.7.1 “System data
AC500-XC” on page 1023
Only additional details are therefore documented below.
The technical data are also applicable to the XC version.
Parameter Value
Connection of the supply voltage 24 V
DC at the terminal base of the processor
module
Removable 5-pin terminal block with spring con-
nection
Current consumption on 24 V DC
Min. typ. (module alone) PM5630-2ETH: 110 mA
PM5650-2ETH: 120 mA
PM5670-2ETH: 130 mA
PM5675-2ETH: 140 mA
Processor
module and
terminal base
Device specifications
Processor modules > AC500 (standard)
2022/01/313ADR010278, 3, en_US94