The system data of AC500-XC
Ä
Chapter 2.7.1 “System data AC500-XC” on page 1023 are
applicable to the XC version.
Only additional details are therefore documented below.
The technical data are also applicable to the XC version.
Parameter Value
Number of I/O channels per module Max. 24 (depending on the inserted communi-
cation interface module)
Distribution of the channels into groups 3 groups of max. 8 channels each (2.0...2.7,
3.0...3.7, 4.0...4.7), the allocation of the chan-
nels is given by the inserted communication
interface module
Network interface connector 10 screw or spring terminals (1.0...1.9)
Rated voltage 24 V DC
Max. permitted total current 10 A via the supply terminals (UP, UP3 and
ZP)
Grounding Direct connection to the grounded DIN rail or
via the screws with wall mounting
Screw terminals Front terminal, conductor connection vertically
with respect to the printed circuit board
Spring terminals Front terminal, conductor connection vertically
with respect to the printed circuit board
Weight 200 g
Mounting position Horizontal or vertical
1.5.3.2 Ordering data
Part no. Description Product life cycle phase *)
1SAP 211 400 R0001 TU517, terminal unit, 24 V DC, screw
terminals
Active
1SAP 211 200 R0001 TU518, terminal unit, 24 V DC, spring
terminals
Active
1SAP 411 200 R0001 TU518-XC, terminal unit, 24 V DC,
spring terminals, XC version
Active
*) Modules in lifecycle Classic are available from stock but not recommended
for planning and commissioning of new installations.
1.5.4 TU531 and TU532 for I/O modules
● TU531, I/O terminal unit, 230 V AC, screw terminals
● TU532, I/O terminal unit, 230 V AC, spring terminals
● TU532-XC, I/O terminal unit, 230 V AC, spring terminals, XC version
● TU532-H, I/O terminal unit, hot swap, 230 V AC, spring terminals
● TU532-H-XC, I/O terminal unit, hot swap, 230 V AC, spring terminals, XC version
Terminal units (AC500 standard) > TU531 and TU532 for I/O modules
2022/01/31 3ADR010278, 3, en_US 135
To Next Page
Loading...
