ABB AC500 V3 - Ordering data

Parameter Value
Way of operation Non-latching type
Output delay On Request
Output data length 1 byte
Output current
Rated current per channel (max.) 0.3 A
Rated current per group (max.) 0.3 A
Surge current (max.) On request
Lamp load (max.) On request
Spark suppression with inductive AC loads Must be performed externally according to
driven load specification
Switching Frequencies
With resistive loads Max. 10 Hz
With inductive loads Not applicable
With lamp loads Max. 10 Hz
Output type Non-protected
Protection type External fuse on each channel
Rated protection fuse 2 A fast
Short-circuit-proof / Overload-proof No, should be provided by an external fuse
or circuit breaker
Overload message No
Output current limitation No
Resistance to feedback against 230 V AC No
Connection of 2 outputs in parallel Not applicable
Max. cable length
Shielded 500 m
Unshielded 150 m
Ordering data
Part no. Description Product life cycle phase *)
1TNE 968 902 R2203 DO572, digital output module, 8 DO,
triac output
Active
1TNE 968 901 R3101 Terminal block TA563-9, 9 pins, screw
front, cable side, 6 pieces per unit
Active
1TNE 968 901 R3102 Terminal block TA563-11, 11 pins,
screw front, cable side, 6 pieces per
unit
Active
1TNE 968 901 R3103 Terminal block TA564-9, 9 pins, screw
front, cable front, 6 pieces per unit
Active
1TNE 968 901 R3104 Terminal block TA564-11, 11 pins,
screw front, cable front, 6 pieces per
unit
Active
Device specifications
I/O modules > Digital I/O modules
2022/01/313ADR010278, 3, en_US230