*) Modules in lifecycle Classic are available from stock but not recommended
for planning and commissioning of new installations.
2.6.5.5 TA526 - Wall mounting accessory
If a terminal base TB5xx or a terminal unit TU5xx should be mounted with screws, the wall
mounting accessories TA526 must be inserted at the rear side first. This plastic parts prevent
bending of terminal bases and terminal units while screwing up.
Handling of the wall mounting accessory is described in detail in the section Mounting and
disassembling the terminal unit
Ä
“Mounting with screws” on page 984 and Mounting/Disas-
sembling Terminal Bases and Function Module Terminal Bases
Ä
“Mounting with screws”
on page 982.
Parameter Value
Weight 5 g
Dimensions 67 mm x 35 mm x 5,5 mm
Part no. Description Product life cycle phase *)
1SAP 180 800 R0001 TA526, wall mounting acces-
sory
Active
*) Modules in lifecycle Classic are available from stock but not recommended
for planning and commissioning of new installations.
Purpose
Handling
instructions
Technical data
Ordering data
System assembly, construction and connection
AC500 (Standard) > Handling of accessories
2022/01/313ADR010278, 3, en_US1018
To Next Page
Loading...
