When vertically mounted, always place an end-stop terminal block (e.g. type
BADL, P/N: 1SNA399903R0200) on the bottom and on the top of the modules
to properly secure the modules.
With high vibration applications and horizontal mounting, we also recommend
to place end-stop terminals at the right and left side of the device to properly
secure the modules, e.g. type BADL, P/N: 1SNA399903R0200.
2.6.2.2 Mechanical dimensions AC500
Fig. 182: Terminal bases, side view and front view
Dimensions: ter-
minal bases
System assembly, construction and connection
AC500 (Standard) > Mechanical dimensions
2022/01/313ADR010278, 3, en_US978
To Next Page
Loading...
