ABB AC500 V3 - Output ranges voltage and current; Technical data

Output ranges voltage and current
The represented resolution corresponds to 16 bits.
Range -10...+10 V 0...20 mA 4...20 mA Digital value
Decimal Hex.
Overflow 0 V 0 mA 0 mA > 32511 > 7EFF
Value too high 11.7589 V
:
10.0004 V
23.5178 mA
:
20.0007 mA
22.8142 mA
:
20.0006 mA
32511
:
27649
7EFF
:
6C01
Normal range 10.0000 V
:
0.0004 V
20.0000 mA
:
0.0007 mA
20.0000 mA
:
4.0006 mA
27648
:
1
6C00
:
0001
0.0000 V 0.0000 mA 4.0000 mA 0 0000
-0.0004 V
:
-10.0000 V
0 mA
:
0 mA
3.9994 mA
0 mA
0 mA
-1
-6912
-27648
FFFF
E500
9400
Value too low -10.0004 V
:
-11.7589 V
0 mA
:
0 mA
0 mA
:
0 mA
-27649
:
-32512
93FF
:
8100
Underflow 0 V 0 mA 0 mA < -32512 < 8100
Technical data
The System Data of AC500 and S500 Ä Chapter 2.6.1 “System data AC500” on page 971 are
applicable to the standard version.
Only additional details are therefore documented below.
Parameter Value
Process voltage
Connections Terminals 1.8, 2.8, 3.8 and 4.8 for +24 V
(UP) as well as 1.9, 2.9, 3.9 and 4.9 for 0
V (ZP)
Rated value 24 VDC
Max. ripple 5 %
Protection against reversed voltage Yes
Rated protection fuse on UP 10 A fast
Galvanic isolation Yes, per module
Current consumption
From 24 VDC power supply at the terminals
UP/L+ and ZP/M of the CPU/bus module
Ca. 2 mA
From UP at normal operation 0.10 A + output loads
Inrush current from UP (at power up)
0.040 A
2
s
Device specifications
I/O modules > Analog I/O modules
2022/01/313ADR010278, 3, en_US428