The I/O module must not be used as a decentralized I/O module with CI590-
CS31-HA communication interface modules.
Functionality
Parameter Value
LED displays For signal states
Internal power supply Via I/O bus
External power supply Via the terminals ZP and UP (process voltage 24 V DC)
Connections
For a detailed description of the mounting, disassembly and connection of the
module, please refer to the System Assembly chapter
Ä
Chapter 2.5 “AC500-
eCo” on page 925.
The connection is carried out by using removable 9-pin and 11-pin terminal blocks. These
terminal blocks differ in their connection system (spring terminals or screw terminals, cable
mounting from the front or from the side). The terminal blocks are not included in the module's
scope of delivery and must be ordered separately.
The following block diagram shows the internal construction of the digital inputs and outputs:
I/O modules > Digital I/O modules
2022/01/31 3ADR010278, 3, en_US 245
To Next Page
Loading...
