ABB AC500 V3 - 1.5.1.2 Ordering data; 1.5.2 TU515, TU516, TU541 and TU542 for I;O modules

1.5.1.2 Ordering data
Part no. Description Product life cycle phase *)
1SAP 214 200 R0001 TU507-ETH, Ethernet terminal unit,
24 V DC, screw terminals
Active
1SAP 214 000 R0001 TU508-ETH, Ethernet terminal unit,
24 V DC, spring terminals
Active
1SAP 414 000 R0001 TU508-ETH-XC, Ethernet terminal
unit, 24 V DC, spring terminals,
XC version
Active
*) Modules in lifecycle Classic are available from stock but not recommended
for planning and commissioning of new installations.
1.5.2 TU515, TU516, TU541 and TU542 for I/O modules
● TU515, I/O terminal unit, 24 V DC, screw terminals
● TU516, I/O terminal unit, 24 V DC, spring terminals
● TU516-XC, I/O terminal unit, 24 V DC, spring terminals, XC version
● TU516-H, I/O terminal unit, hot swap, 24 V DC, spring terminals
● TU516-H-XC, I/O terminal unit, hot swap, 24 V DC, spring terminals, XC version
● TU541, I/O terminal unit, 24 V DC, screw terminals
● TU542, I/O terminal unit, 24 V DC, spring terminals
● TU542-XC, I/O terminal unit, 24 V DC, spring terminals, XC version
● TU542-H, I/O terminal unit, hot swap, 24 V DC, spring terminals
● TU542-H-XC, I/O terminal unit, hot swap, 24 V DC, spring terminals, XC version
The input/output modules plug into the I/O terminal unit. When properly seated, they are
secured with two mechanical locks. All the connections are established via the terminal unit,
which allows removal and replacement of the I/O modules without disturbing the wiring at the
terminal unit.
Device specifications
Terminal units (AC500 standard) > TU515, TU516, TU541 and TU542 for I/O modules
2022/01/313ADR010278, 3, en_US126